If you can imagine a perfect LED for small grow rooms.....this is it! The Lumatek ATS 300w PRO LED Grow Light  is the perfect light for grow rooms covering an area of 1m x 1m and at high levels of PPF of 816 umol/s  and a Photon Efficacy (fixture efficiency) of 2.7 µmol/J why would you bother with traditional grow lights! Heat produced by these lights is minimal and can even be used by placing them between traditional lights to give your plants better coverage and higher yields.

With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek ATS Pro full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide sole-source or supplemental grow lighting for propagation, vegetative and flowering growth periods of indoor-grown crops.

The fixture efficacy will vary depending on the Input Voltage used. The array of the new ATS Pro range create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts.

For different cultivars, propagation, and vegetative growth periods this agile fixture may be dimmed without losing efficiency. The high efficiency and low powered LED configuration reduce the temperature of the LEDs increasing the output and improving light maintenance.

ATS300W PRO Range
The new Pro line of ATS is built using high quality Lumatek controllable drivers and latest generation higher efficiency top bin White, Red & Far Red Diodes. The upgraded diodes are now more evenly distributed across the whole length of the light bars resulting on a larger and more even light spread and footprint.

Other new features of this line include: New IP65 rating; Clear Glue protection cover technology on the LED bars, resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes and extra corrosion resistance; And new Control capability with the Lumatek Control Panel Plus 2.0.

Full Spectrum
Lumatek LED grow light solutions use a blend of white, deep red & far-red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption.

Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked, they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

Passive cooling
Lumatek’s innovative design and advancement in LED technology has produced a high-powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long-life span and operate silently.

External Control
The ATS Pro fixtures can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

Universal Control Systems Compatibility

Lumatek Zeus LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. 

• Efficacy: up to 2.7 µmol/J
• PPF: 816 µmol/s
• Input Voltage: 220-240V, 50-60Hz
• Input Power: 310W (±2%)
• Footprint: Up to 1x1m
• Waterproof: IP65
• Lifetime: +60 000 hrs
• Light Distribution: 120°
• Light Source: Higher Spec White, Red & Far Red Diodes
• Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
• External Control: With Lumatek Digital Panel Plus 2.0 (not included)
• Weight: 5.2 Kg
• Dimensions: 559.5x559.5x71.6mm
• Spectrum: Full Spectrum +
• BTU: 1051 BTUs/h

LUMATEK ATS 300W TECHNICAL INFORMATION DATA SHEET

 FOR MORE INFORMATION CLICK IN HERE

Can be fully controlled with  the Lumatek Digital Panel Plus 2.0

LUMATEK Digital Panel PLUS 2.0 (HID+LED)

CLICK ON THE IMAGE FOR INFORMATION ON THE CONTROL PANEL

• Connectable with Lumatek Controllable HID ballasts & fixtures; 315W, 600W, 630W & 1000W
• Connectable with Lumatek Controllable LED drivers & fixtures; 90W, 465W, 600W & 1000W.
• Dual signal RS485 digital for HID and 0-10V analog protocol for LED.