Lumatek has innovated again and come up with the ideal LED fixture for Seedlings, Clones and for any low PPFD target plants.

Meet the new VF120W, with Vertical Farming Range (VF Range).

LUMATEK-VF-LED-120W-MANUAL

These versatile high efficacy fixtures will ensure you reach your goals when used in Vertical Farming applications. From propagation factories and nurseries, climate chambers, warehouse farms, containers, between others, the Lumatek VF range will deliver the adequate light quality spectral and photon flux levels you need.

The VF120W comprises of four 30W LED bars with 4000K White and 3000K Warm White diodes, with a total PPF output of 308 μmol/s and a 2.4 μmol/J Efficacy.

The VF range already includes the new clear Glue protection cover technology on the LED bars; resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproof of IP65. For basic maintenance, simply clean the bars with wet cotton.

The fixture will require a 650W Driver (sold separately) that can run up to 5 units of VF120W fixtures, and can be dimmed with a 0-10V Light Dimmer (also sold separately) or externally controlled with our Digital Panel Plus 2.0 or any other Universal Controller 0-10V. Also, the daisy-chain driver connectivity is possible if you would like to add more units to your system so you can dim all fixture with a single dimmer.

FEATURES

- Ideal Spectrum and Light Intensity for low PPFD target plants
- Efficacy of 2.4 µmol/J
- PPF of 308 µmol/s
- Includes four 30W LED bars attached to the frame
- Top bin White 4000K and Warm White 3000K LEDs
- External control with Lumatek Control Panel Plus 2.0 or Universal Controllers 0-10V
- Fully Dimmable an In-Series Link Option
- High heat dissipation
- Shorten Plant Growth Cycle
- Powered by a 650W Driver sold separately, that can run up to 5 VF120W Fixtures
- User friendly Plug & Play Assembling
- IP65 Water & Dustproof rated
- 3 Year Warranty

ITEMS INCLUDED:
- 1 x VF120W LED Fixture

For large facilities, where the 3-Phase electrical supply domains, a 400 Volts, 650W Driver is more suitable.

External Control

This Lumatek LED fixture can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

Universal Control Systems Compatibility

Lumatek LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.